Simon XT - Voice Chime

Follow the steps below to edit the voice chime for the Simon XT panel.

Step-by-Step Instructions:

1. Start with your system in a disarmed state. Press the up or down arrows until you get to System Programming, then press Ok.

Simon_XT_Disarmed.png Simon_XT_System_Programming.png

2. Enter the default installer code 4321, then press Ok to enter the system programming menu, which first displays Access Codes. If this code differs on your system, you can text a Support Representative at 469.513.8685, 7 days a week from 8 am to 8 pm CT.

Simon_XT_Enter_Code.png Simon_XT_Access_Codes_Main.png

3. Press the arrows to scroll to Siren Options then press Ok.

Simon_XT_Siren_Options.png Simon_XT_Siren_Options_Piezo_Beeps.png

4. Press the arrows to scroll to Voice Chime, then press Ok.

Simon_XT_Siren_Options_Piezo_Beeps.png Simon_XT_Siren_Options_Voice_Chime.png

5. Enter 1 for the sensor name, 2 for a loud bell, or 3 for a softer bell, or Disarm for no audible alarm, then press Ok to save.

Simon_XT_Siren_Options_Voice_Chime_1.png Simon_XT_Siren_Options_Voice_Chime_Off.png

6. Press Status several times to exit.