Simon XTi - Cellular Signal Strength

1. Press the settings gear, then press the down arrow several times.

Enter_Programming_01_Main.jpg Enter_Programming_02_Settings.jpg


2. Press Enter by Programming, enter the default installer code 4321, then press Ok.

Enter_Programming_03_Programming_Enter.jpg Enter_Programming_04_Enter_Code.jpg


3. Press Interactive Services, then press Module Status.

Garage_Door_01_Installer_Menu.png


4. Signal strength should be 2 bars minimum, then press Close several times to exit.

Programming_-_Interactive_Services_Module_Status_01.png