Simon XTi - Sensor Test

1. Press bottom right GEAR icon then press DOWN ARROW several times

Enter_Programming_01_Main.jpg Enter_Programming_02_Settings.jpg

2. Press ENTER button by System Tests then enter Master Code then press OK

Settings_02.jpg Settings_03_Enter_Code.jpg

3. Press SENSOR TEST then activate all sensors

Sensor_Test_01.jpg Tests_02_Sensor_Test.jpg

  • Door or Window Sensors - Open and close
  • Keyfobs - Press any button
  • Motion Detectors - Remove front of the motion sensor from the back plate
  • Smoke / Heat Detector - Hold Test button
  • Carbon Monoxide Detector - Hold Test button

4. Simon XTi beeps on activation and displays sensor signal strength, press CLOSE to exit

Sensor_Test_02.jpg Tests_03_Sensor_Test.jpg

5. When all sensors are tested press CLOSE twice to exit

Test_Exit_01.png Test_Exit_02.jpg