2. Press SMART HOME SETTINGS then press ADD DEVICES

GC3_System_Settings_03_Smarthome_Select.png GC3_System_Settings_04_Smarthome_Main.png

3. 2GIG GC3 enters learn mode, at the thermostat

GC3_System_Settings_05_Add_Devices.png

Alarm.com ADC-T2000

1. Press MODE button to display temperature, press MODE until heat/cool icons disappear

T2000_Setup_03.jpg T2000_Setup_02.jpg

2. Hold DOWN ARROW until Radio Wave Icon appears below temperature display

T2000_Setup_03.jpg

Alarm.com ADC-T3000

1. Press MENU button to display Menu then press DOWN ARROW until SETTINGS

Alarm.com_ADC-T3000_Learn_00.jpg Alarm.com_ADC-T3000_Learn_01.jpg

2. Press ENTER button to select then press DOWN ARROW until NETWORK

Alarm.com_ADC-T3000_Learn_02.jpg Alarm.com_ADC-T3000_Learn_03.jpg

3. Press ENTER button to select then press UP or DOWN ARROW to highlight ADD

Alarm.com_ADC-T3000_Learn_04.jpg Alarm.com_ADC-T3000_Learn_05b.jpg

4. Press ENTER button to select and start Z-Wave learn mode

Alarm.com_ADC-T3000_Learn_05.jpg Alarm.com_ADC-T3000_Learn_06.jpg

5. Learning may take up to 1 minute to complete and exit

Alarm.com_ADC-T3000_Learn_07.jpg

Radio Thermostat CT20 or GE IS-ZW-TSTAT-100

Remove top cover then press the MATE button

Radio_Thermostat_CT20.jpg

Radio Thermostat CT30, CT100, CT100+ and CT101

Radio_Thermostat_CT100_Front_Small.jpg

1. Press MENU button, r1 displays

Radio_Thermostat_CT100_Learn_01_Press_Menu__1_.jpg Radio_Thermostat_CT100_02.jpg

2. Press MATE under antenna icon twice then display LINK if successfully learned

Radio_Thermostat_CT100_Learn_03_Mate_Flashes.jpg Radio_Thermostat_CT100_Link.jpg

Radio Thermostat CT110

Press left side Antenna button

Radio_Thermostat_CT110.jpg

GoControl or RCS Technologies TBZ-48

1. Hold FAN button 5 seconds until SETUP appears then UP ARROW button until ZWAVE

GoControl_Thermostat_Learn_01.jpgGoControl_Thermostat_Learn_02.jpg

2. Press MODE button to select then press MODE button again to learn

GoControl_Thermostat_Learn_03.jpg GoControl_Thermostat_Learn_04.jpg

3. If successful press FAN button to exit, antenna icon appears by temperature display

GoControl_Thermostat_Learn_05.jpg GoControl_Thermostat_Learn_06.jpg

Trane Thermostat

TZEMT400BB32MAA_Front_1.jpg

1. Press MENU button then scroll down to Z-WAVE INSTALL and press SELECT button

Trane_TZ45_Learn_01.png Trane_TZ45_Learn_02.png

2. Press Scroll UP button for YES to begin Z-Wave enrollment

Trane_TZ45_Learn_03.png Trane_TZ45_Learn_04.png

3. If successful displays main menu, press DONE button to exit

Trane_TZ45_Learn_05.png

5. If successful Adding Device displays press OK when finished

Add_Device_03.png Add_Device_04.png

6. Press RENAME then enter a new name for the thermostat then press DONE

Radio_Thermostat_CT100_Learn_05_2GIG_Learned__1_.png Radio_Thermostat_CT100_Learn_06_2GIG_Rename__1_.png

7. Press GC3_Back_Arrow.png or the HOME button to exit

Radio_Thermostat_CT100_Learn_07_2GIG_Exit__1_.png GC3_Home_Button_2.jpg