Simon XTi - User Functions
Arm Away
Arms all sensors
1. Press LOCK icon for the arming screen then press ARM ALL button
2. Timer appears while arming
Arm Stay Instant
Arms exterior doors and windows with no entry delay, bypasses interior motion detectors
1. Press LOCK icon then press OFF by Entry Delay then press DOORS & WINDOWS ONLY
2. Countdown timer displays while arming
Arm Away Silent
Turns off exit delay beeps after arming away
1. Press LOCK icon then press ON button by Silent Exit then press ARM ALL to arm Away
2. Exit delay timer appears while arming
Arm Stay
Arms only exterior door and window sensors and bypasses interior motion detectors
1. Press the GEAR icon at the bottom right then press DOORS & WINDOWS ONLY
2. Countdown timer appears while arming
Disarm
Turns off the system
If Armed STAY press the LOCK icon then enter your User Code
If Armed Away and entering premise enter your User Code
Silence and Reset Alarm
1. Press Red Alarm Banner then enter your User Code to disarm and silence alarm
2. Press bottom right GEAR icon then press HEAR button by Panel Status to hear alarm
3. Press CLEAR then press CLOSE to exit
Bypass Sensors
Force Bypassing - Automatic bypass of open sensors while arming
1. Open doors or windows to bypass then press the LOCK icon
2. Press ARM ALL to arm, protest beeps sound, open sensors display, press BYPASS
3. Simon XTi arms normally
Direct Bypassing - Manual bypass of sensors
1. Press bottom right GEAR icon then press SELECT button by Direct Bypass
2. Press NOT BYPASSED button by sensors to change to BYPASSED then press CLOSE
3. Press CLOSE again to exit
4. Press LOCK icon then press DOORS and WINDOWS ONLY or ARM ALL to arm
Change The Master Code
1. Click on GEAR icon at the bottom right then press DOWN ARROW several times
2. Press ENTER by Programming then enter your Master Code then press OK
3. Press ACCESS CODES then press Master Code
4. Enter new Master Code then press SAVE then CLOSE to exit
5. Press CLOSE again to exit programming
Add User Code
1. Click on the GEAR icon at the bottom right then press DOWN ARROW several times
2. Press ENTER by Programming then enter your Master Code then press OK
3. Press ACCESS CODES then press box by an empty User Code
4. Enter new User Code then press SAVE then CLOSE to exit
5. Press CLOSE again to exit programming
Delete User Codes
1. Click on the GEAR icon at the bottom right then press DOWN ARROW several times
2. Press ENTER by Programming then enter your Master Code then press OK
3. Press ACCESS CODES then press to select User Code to delete
4. Press DELETE then press SAVE to exit
5. Press CLOSE several times to exit
Door Chimes
Sounds tone and speaks when door or window sensor is opened
1. Press the bottom right GEAR icon press the Chime ON to enable or OFF to disable
2. Press CLOSE to exit
Severe Weather Alerts
When Server Weather Alerts are issued, Simon XTi sounds alarm on sensor 39 Weather Alert
The alarm automatically clears 30 minutes after alert expires or can be cleared manually
1. Press the Red Alarm Banner then enter User Code to silence the alarm
2. A scrolling banner appears on the bottom showing the severe weather alert
3. Press the bottom right GEAR icon then press DOWN ARROW button several times
4. Press the ENTER button by Programming then enter your Master Code
3. Press INTERACTIVE SERVICES then CLEAR BANNER
4. After clearing the banner press CLOSE several times to exit
Program Duress Code
When Duress Code disarms the system, it sends a silent duress alarm to the Brinks Security
1. Press the bottom right GEAR icon then press DOWN ARROW button several times
2. Press ENTER by Programming then enter your Master Code then press OK
3. Press ACCESS CODES then press DOWN ARROW
4. Press Empty Box by Duress Code then enter new Duress Code then press SAVE to exit
5. Press CLOSE several times to exit
Set Screen Brightness
1. Press the bottom right GEAR icon then press DOWN ARROW button several times
2. Press ARROW buttons to set brightness then press CLOSE to exit
Program Voice Chimes
Sounds tone and speaks when a door or window sensor is opened
1. Press the bottom right GEAR icon then press DOWN ARROW button several times
2. Press ENTER by Programming then enter the Installer Code 4321 then press OK
3. Press SIREN OPTIONS then press VOICE CHIME
4. Select chime sound then press SAVE then press CLOSE several times to exit
Setting The Time and Date
1. Press the bottom right GEAR icon then press DOWN ARROW button several times
2. Press ENTER button by Set Date/Time then enter your Master Code
3. Press HOURS then enter Hour 1 to 12 then press SAVE to exit
4. Press MINUTES then enter Minutes 1 to 59 then press SAVE to exit
5. Press to toggle AM or PM
6. Press MONTH then enter Month 1 to 12 then press SAVE to exit
7. Press DAY then enter Day 1 to 31 then press SAVE to exit
8. Press YEAR then enter Year 0000 to 9999 then press SAVE to exit
9. Press CLOSE to exit