Ecolink Motion Replacement

Identify the Ecolink Motion Detector:

With security technology constantly changing, we want to make sure our customers have the best equipment the market has to offer. This motion detector is just like the existing Ecolink motion detector, but this one has an extra layer of security with encryption. Encrypting your motion detector protects your home by preventing unauthorized access to your data.


Uninstall the Ecolink Motion Detector

Follow the steps below to remove the Ecolink motion detector:

  1. Place system on test (following this link for instructions).
  2. Locate your existing motion detector and remove carefully from your wall.


Delete the Ecolink Motion Detector:

1. Swipe down the clock display, then press Settings.



2. Enter the default installer code 1111, then press Advanced Settings.

Installer_Code.png Advanced_Settings.jpg


3. Press Installation, then Devices.

Installation.png Devices.jpg


4. Press Security Sensors, then Delete Sensors.

Security_Sensors.png Delete_Sensors.png


5. Select a sensor by adding a checkmark, then press Delete, then press OK to confirm.

Delete_Sensor_2.png OK_to_confirm.png


6. Press Home to exit programming.



Installing the New Motion Detector:

  • • The coverage area is 20 feet.
  • • The detector must be 7-8 feet from the floor in the corner of the room.
  • • Follow the steps below to install and mount your new motion detector:
  1. Clean and dry the wall (and your hands) before mounting the device.
  2. Remove tape backing and apply pressure against the wall for 10 seconds.


Programming the New Motion Detector:

1. Swipe down from the clock display at the top of the screen, then press Settings.

IQ_Settings.png IQ_Clock.jpg


2. Press Advanced Settings, then enter the default installer code 1111.

Advanced_Settings.jpg Installer_Code.png


3. Press Installation, then Devices.

Installation.png Devices.jpg


4. Press Security Sensors then Auto Learn Sensors.



5. Depending on the motion detector, press the top or bottom tab to remove the cover to learn.




6. Press OK to confirm.

Press_Tamper.png OK_to_confirm.png


7. Enter sensor information then press Add New to save, then Home to exit.


Sensor Information:

  • • Sensor DL ID: Don’t touch this option
  • • Sensor Type: Select Motion Detector
  • • Sensor Name: Select an appropriate name or create a custom description
  • • Chime Type: This allows you to apply a specific sound to your device
  • • Sensor Group: Set this to 17
  • • Voice Prompts: Leave this alone

Returning Ecolink Motion Detector

Once you have successfully installed your new motion detectors, please return all Ecolink motion detectors to us at your earliest convenience at the following address:

Brinks Home Security
Attn: Parts Return
616 W. Bertrand Ave
St. Marys, KS 66536