GC2 GoControl - Remove Z-Wave Device

The below steps will walk you through removing an existing Z-Wave device from the GC2 (2GIG GoControl 2) panel. Please note that some Z-Wave devices require 24 hours to update before they can be added back.

1. Press SERVICES, select the Z-Wave logo, then press bottom right WRENCH button
c001_image.png c002_image.png c003_image.png


2. Enter Installer Code 1561, then press REMOVE DEVICES

c004_image.png c005_image.png c006_image.png


3. Press the mate button on your Z-Wave device or enter Z-Wave device programming to delete


c007_image.jpg

c008_image.png c009_image.png

4. Press BACK or the HOME button to exit


Chat