Door/Window Sensor Model QS1135-840 Guide

Specifications

  • • Sensor: 2.25”H x 1”W x .5”D
  • • Wireless signal range: 600ft (200M), open-air
  • • Code outputs: tamper, tamper restore, alarm, alarm restore, low battery
  • • Transmitter frequency: 319.5 MHz
  • • Unique code ID
  • • Supervisory keep-alive interval: 70 minutes
  • • RF Peak field strength: typical 36000 uV/m at 3m
  • • Operating Temperature: -10C~50C Relative Humidity: 5-95% Non-Condensing Storage Temperature: -40-80C
  • • Replace the battery with 2 3V Lithium batteries every 5 years

QS-1115_IQ_Mini_DW_Door_Sensor_711x574.jpg

Installation Steps

1. Choose an installation location to monitor windows and doors, including sliding glass doors and exterior doors.

001b_step_1_Choose_appropriate_location.png

2. Remove the battery tabs placed in new units when batteries are pre-installed.

002_-_battery_tabs.png

3. Apply adhesive (form-fitting 3M 2-sided stick strip included with new units).

003_3M_backing_tape.png

4. Line up the magnet with the sensor magnet locator mark.

004_line_up_magnet_with_sensor.png

5. Place the sensor on the door or window frame within 1/4" of the magnet placed on the door or window.

005_qtr_inch_max.png

6. Add the sensor to your panel by placing the panel into "learn mode", then tamper the device.

006_add_to_panel.png


Chat