IQ Panel 2 - Programming a Smoke Detector

1. Swipe down from the clock display at the top of the screen then press Settings.

Enter_Program_01_Main.jpg Enter_Program_02_Dropdown.jpg

2. Press Advanced Settings then enter the default installer Code 1111 or 2222.

Enter_Program_03_Settings_Menu.jpg Enter_Program_04_Enter_Code.jpg

3. Press Installation then Devices.

Installation_Screen.png 6.png

4. Press Security Sensors then Auto Learn Sensors.

7.png 8.png

5. Remove the sensor from the base to learn, then press OK to confirm.

Auto_Learn_Confirm.png

Smoke_Detector_2.png

6. Enter sensor settings then press Add New to save, then press Home to exit.

11.png Auto_Learn_Sensor_12_Exit.jpg


Sensor Information:

  • Sensor DL ID: Leave this option alone
  • Sensor Type: Select “Smoke Detector”
  • • Sensor Name: Select an appropriate name or create a "Custom Description"
  • • Chime Type: This allows you to apply a specific sound to your device when it’s tampered
  • • Sensor Group: Set to 26 "Smoke Heat"
  • • Voice Prompts: Leave this option alone


Chat