2GIG Glassbreak Detector Model GB1E-345 Guide


  • 15' 360° detection range
  • 345 MHz sends a supervisory signal every 70 minutes
  • RF range up to 100' to panel
  • Operating temperature 32°F to 120°F
  • Battery: 2 CR123A 3-Volt Lithium, up to 5 years estimated battery life

001 2GIG-GB1-345 Glassbreak

Installation Steps

  1. If not already installed, insert the batteries.
  1. With the cover off, place the base of the detector on the adjacent or opposite wall from the window being protected.
  1. Use the 3 plastic wall anchors provided to mount the base of the detector to the wall.
    Important: Always mount the detector so the test button is in the downward position.
  1. Holding the cover, align the imprinted arrows. Then use a clockwise twist motion to lock the cover into place.