Connecting a 2GIG-GB1E-345 Glassbreak Detector to a 2GIG GoControl 2

Video Instructions:


Step-by-Step Instructions:

Follow the steps below to connect your 2GIG GB1E-345 glassbreak detector to the 2GIG GoControl 2 Panel.

  1. Press the Brinks Home logo in the bottom right of the panel, enter the default Installer Code 1561 or 1171, then press system configuration to go to Q1 Wireless Sensor Programming.

001c Programming - Enter Program 01 280x159001b User Menu - Disarm 05 280x159001a Programming - Enter Program 03 280x159

  1. Press the right arrow to choose your new sensor number, choosing an open zone as indicated by a white space and number only, then press the down arrow to continue.

002b Image Sensor Program 01a 275x156002a Image Sensor Program 01 275x156

  1. Press the right arrow to select Sensor Type (03) Perimeter, then press the down arrow to continue.

003b Image Sensor Program 02a Interior Follower 275x156003a Image Sensor Program 02 Interior Follower 275x156

  1. Press the right arrow to select your Equipment Code, 0864 - GB1-345 Glassbreak Detector, then the down arrow to continue.

005b Image Sensor Program 03a 9999 Image Sensor 275x1560004.2 GB1-345 Glassbreak 2GIG

 

  1. Press shift, then learn, then insert batteries or press the tamper button several times on the glassbreak detector. Wait 20-30 seconds and once the sensor is found press Ok, then the down arrow to continue.

*Alternatively, this step can be completed by manually entering the serial number on the back of the sensor.

006c Image Sensor Program 04 Serial 1 275x156006a Glassbreak Sensor Program 04 Serial 2 275x156

 

  1. Enter (0) new for the Equipment Age, then press the down arrow to continue.

007a Sensor Program 05 Age 275x156

 

  1. Loop Number will be (1) 1, then press the down arrow to continue.

008 Sensor Program 06 Loop 1 275x156

 

  1. Leave the Dialer Delay set to the default of (1) enabled, then press the down arrow to continue.

009b Sensor Program 07a Delay 275x156009a Image Sensor Program 07 Delay 275x156

 

  1. Press Insert, then the right arrow to select your desired voice descriptor. For additional words, press Insert again and repeat the steps.

*Alternatively: you may use a 3-digit code to jump to the word of your choice. Code #104 represents Glassbreak Detector.

010a Image Sensor Program 08 Description 2 280x159

 

Enter up to 6 words, then press the down arrow to continue.

011 Image Sensor Program 08 Description 3 280x159

 

  1. Press the right arrow to set Sensor Reports to (1) enabled, then press the down arrow to continue.

012b Image Sensor Program 09 Disabled 275x156012a Image Sensor Program 09 Enabled 275x156

 

  1. Press the right arrow to set Supervised to (1) enabled, and press the down arrow to continue.

011a.alt 2GIG Q1 RF Sensor Programming 11 Supervision 278x158

 

  1. Chime is typically left at (00) disabled for glassbreak sensor chime. Press down to continue to the summary.

013a Image Sensor Program 10 Summary 2 275x156

 

  1. Press edit next to program another sensor, or press skip, end, and exit to complete the process.

013b Image Sensor Program 10 Summary 1 275x156


Chat