Simon XT - Flood Sensor Programming

Simon_XT_v1.3_Scroll_Buttons.jpg

1. Press Simon_XT_Scroll_Up_3.jpg or Simon_XT_Scroll_Down_3.jpg until System Programming is displayed on screen, then press OK_Button_2.jpg.

Simon_XT_Disarmed.png Simon_XT_Then.jpg Simon_XT_System_Programming.png

2. Enter the default installer code 4321. If your system's code differs, you can text a Support Representative at 469.513.8685, 7 days a week from 8 am to 8 pm CT.

Simon_XT_Enter_Code.png Simon_XT_Then.jpg Simon_XT_Access_Codes_Main.png

3. Press Simon_XT_Scroll_Up_3.jpg or Simon_XT_Scroll_Down_3.jpg until Sensor displays on screen, then press OK_Button_2.jpg.

Simon_XT_Sensor_Program_01.png Simon_XT_Then.jpg Simon_XT_Sensor_Program_02.png

4. Press OK_Button_2.jpg again to place the panel in learn mode.

Simon_XT_Sensor_Program_02.png Simon_XT_Then.jpg Simon_XT_Sensor_Program_03.png

5. Press the end tab with screwdriver then remove cover to learn.

Interlogix_Flood_Sensor_1.jpg

6. Simon XT beeps and Grp flashes on screen. Enter 38 for water sensor, then press OK_Button_2.jpg.

Simon_XT_Sensor_Program_06a_Glassbreak.png Simon_XT_Then.jpg Sensor_Program_Sn_38_Front_Door.png

7. Sensor name flashes on screen. Press Simon_XT_Scroll_Up_3.jpg or Simon_XT_Scroll_Down_3.jpg to scroll names, then press OK_Button_2.jpg to select.

Sensor_Program_Sn_38_Front_Door_Highlighted.png Simon_XT_Then.jpg Sensor_Program_Sn_38_Water_Sensor_1.png

8. When finished press OK_Button_2.jpg to save.

Sensor_Program_Sn_38_Water_Sensor_2.png Simon_XT_Then.jpg Simon_XT_Sensor_Program_06f_Glassbreak_Trip_Sensor_11.png

9. Press Status several times to exit.
Simon_XT_Status_Mini.jpg