Simon XTi - Program an Image Sensor

1. Press bottom right GEAR icon then press DOWN ARROW several times

Picture1.png Picture2.png

2. Press ENTER button by System Programming then enter Installer Code 4321

Picture3.png Picture4.png

3. Press SENSORS then press LEARN SENSOR

Picture5.png Picture6.png

4. Pull motion up from back-plate then insert batteries to learn

Picture7.png Picture8.jpg

5. Simon XTi beeps, press EDIT by sensor group then enter 17 then press SAVE

Picture9.png Picture10.png

6. Press EDIT by Sensor Name then press EDIT by word

Picture11.png Picture12.png

7. Scroll words with arrow buttons then select and press SAVE then CLOSE to exit

Picture13.png Picture14.png