Simon XTi - Sensor Name Programming

1. Press bottom right GEAR icon then press DOWN ARROW several times

Interface001.jpg Enter_Programming_02_Settings.jpg

3. Press ENTER by Programming then enter Installer Code 4321 then press OK

Enter_Programming_03_Programming_Enter.jpg Enter_Programming_04_Enter_Code.jpg

4. Press SENSORS then press EDIT SENSOR

sensors.png edit_sensor_2.png

5. Press EDIT by sensor then press SENSOR NAME

Programming_-_Edit_Sensors_02.png Programming_-_Edit_Sensors_03.png

6. Press EDIT by word then select word from list then press SAVE to exit

Programming_-_Sensors_06.png Programming_-_Sensors_07.png

7. Press CLOSE several times to exit programming