Simon XTi - Program a Smoke Detector
1. Press bottom right GEAR icon then press DOWN ARROW several times
2. Press ENTER by Programming then enter Installer Code 4321 then press OK
3. Press SENSORS then LEARN SENSOR
4. Simon XTi enters sensor learn mode
5. Twist smoke detector counter-clockwise and remove from base to learn
6. Press EDIT by Sensor Group then enter 26 then press SAVE to exit
7. Press EDIT by Sensor Name then press EDIT by 1st, 2nd or 3rd word
8. Scroll words with Arrow buttons , press to select then press SAVE then CLOSE to exit
9. Press CLOSE several times to exit programming