IQ Panel - Change Sensor Settings

1. Press SETTINGS then enter Installer Code 1111

2. Press INSTALLATION then SECURITY SENSORS

3. Press EDIT SENSOR then press PENCIL icon to the right of sensor

4. Press SENSOR TYPE then select type of sensor

5. Press SENSOR NAME then select name or press CUSTOM DESCRIPTOR

6. If CUSTOM DESCRIPTOR was selected enter name then press DONE

7. Press CHIME TYPE then select chime tone

8. Press SENSOR GROUP then select sensor type

9. Press VOICE PROMPTS then ON or OFF to enable or disable Voice Chime

10. Press SAVE then BACK or the HOME button to exit