IQ Panel 2 - Programming A Garage Door Sensor

The IQ Tilt is designed to tell you whether an overhead garage door is open or closed.

Sensor Installation:

1. Remove the battery tabs then apply adhesive tape to the bottom of the sensor.

2. Mount the sensor horizontally with the arrow facing down pointing to the door.


IQ Panel 2 Programming:

1. Swipe down from the clock display at the top of the screen then press Settings.

Enter_Program_01_Main.jpg Enter_Program_02_Dropdown.jpg

2. Press Advanced Settings then enter the default installer code 1111 or 2222.

Enter_Program_03_Settings_Menu.jpg Enter_Program_04_Enter_Code.jpg

3. Press Installation then Devices.

Installation_Screen.png 6.png

4. Press Security Sensors then Auto Learn Sensors.

7.png 8.png

5. Open the glassbreak detector cover to learn then press OK to confirm.

Auto_Learn_Confirm.png

Graphic_1.png

6. Program sensor information then press Add New to save, then Home to exit.

11.png Auto_Learn_Sensor_12_Exit.jpg


Sensor Information:

  • • Sensor DL ID: Don't touch this option
  • • Sensor Type: Select Door/Window
  • • Sensor Name: Select an appropriate name or create a custom description
  • • Chime Type: This allows you to apply a specific sound to your device when it’s used
  • • Sensor Group: Enter 10 for an entry delay 13 if for no entry delay
  • • Voice Prompts: This allows you turn on or off the vocal chime