IQ Panel 2 - Programming IQ Glassbreak Detector

Installation:

1. Identify the location for the sensor from the label on the box.

2. Remove the sensor from the box. Open the glassbreak detector by pressing the tab.

3. Remove the plastic battery tabs and close the cover.

4. Locate the glassbreak detector on the ceiling within 15 feet of the windows to be protected.

5. Apply tape to back of the sensor and remove double-sided tape backing then apply pressure for 10 seconds.

IQ Panel 2 Programming:

1. Swipe down from the clock display at the top of the screen then press Settings.

Enter_Program_01_Main.jpg Enter_Program_02_Dropdown.jpg

2. Press Advanced Settings then enter the default installer code 1111.

Enter_Program_03_Settings_Menu.jpg Enter_Program_04_Enter_Code.jpg

3. Press Installation then Devices.

Installation_Screen.png 6.png

4. Press Security Sensors then Auto Learn Sensors.

7.png 8.png

5. Open the glassbreak detector cover to learn then press OK to confirm.

Auto_Learn_Confirm.png

6. Enter sensor information then press Add New to save then Home to exit.

11.png Z-Wave_Add_09_Exit.jpg


Sensor Information

  • • Sensor DL ID: Don't touch this option
  • • Sensor Type: Select Glassbreak
  • • Sensor Name: Select an appropriate name or create a custom description
  • • Chime Type: This allows you to apply a specific sound to your device
  • • Sensor Group: Set this to 13
  • • Voice Prompts: Leave this alone

Chat