IQ Panel 2 - Programming A Z-Wave Door Lock

1. Press or swipe down clock display at top for Settings Tray then press SETTINGS

2. Press ADVANCED SETTINGS then enter the Installer Code 1111 or 2222

3. Press INSTALLATION then DEVICES

4. Press ADD DEVICE then PAIR

5. Remove the battery cover from the Kwikset lock and press the LEFT button

Schlage Deadbolt
1. Enter the six-digit programming code provided in the Schlage documentation

2. Press the SCHLAGE button then 0, The Schlage button flashes orange for a minute

Kwikset Deadbolt
Open the battery cover and press the left button then wait for 2 minutes

Yale Touchscreen Deadbolt
1. Touch the screen with the back of your hand or fingers to activate

2. Enter the 4 to 8 digit Master PIN code then press #, lock should sound a "Happy" tone

3. Press 7 then # to enroll, lock should sound a "Happy" tone

6. If successful lock settings appear, press NAME and select from pre-determined names or press CUSTOM NAME to enter your own name

7. If CUSTOM NAME was selected press CUSTOM DESC then enter name then press CHECK or KEYPAD icon then press ADD to save

8. Press ADD to finish then press BACK ARROW or HOME button to exit