2GIG Motion Detector Batteries
Find the image of your motion detector below to view instructions on how to complete your battery replacement.
2GIG-PIR1-345 Motion Detector:
Remove bottom screw, then pull front cover from the backplate
Remove and replace CR123A 3-Volt Lithium battery
Make sure to securely snap the cover back together to prevent tamper activity
Battery Replacement Video:
Honeywell 5800PIR Motion Detector:
Press the bottom tab to remove the front cover
Remove the CR123A 3-Volt Lithium battery from the back in order to replace the battery
Honeywell 5800PIR-OD Outdoor Motion Detector:
Remove the bottom screw, then pull sensor from backplate
Remove and replace 4 AA batteries. AA 1.5-Volt Lithium batteries are recommended.
Honeywell 5890 Motion Detector:
Insert a screwdriver into the bottom slot to remove the front cover
Remove and replace the 2 CR123A Lithium batteries
Honeywell 5894PI Extended Life Motion Detector:
Slide up from backplate then press to remove from the backplate
Remove and replace 3 CR123A 3-Volt Lithium batteries
Honeywell 5897-35 Dual-Tech Motion Detector:
On the bottom of the sensor, press where indicated below to open the front cover
Remove and replace 4 CR123A 3-Volt Lithium batteries
Honeywell 5898 Dual-Tech Motion Detector:
On the bottom of the sensor, press where indicated below to open the front cover
Remove and replace 4 AA batteries. 4 Energizer L91 AA 1.5-Volt batteries are recommended.