Simon XT - Add Z-Wave Device

Hold * for 10 seconds for Z-Wave menu

Star_Button.jpg Z-Wave_Menu_1.jpg

Hold 1 key for 10 seconds


Simon XT enters Z-Wave Learn mode

Simon_XT_Z-Wave_Add_03.png Simon_XT_Then.jpg Simon_XT_Z-Wave_Add_04.png

GE Jasco Plug-in Light Appliance Module

Double Click Mate button


GE Jasco Wall Dimmer Switch

Turn light switch on and off


GE Wall AC Outlet

Double click center button


Schlage Deadbolt Door Lock

1. Enter 6-digit Program Code provided in the Schlage documentation

2. Press SCHLAGE logo or button then press 0


Kwikset Deadbolt Door Lock

Open battery compartment cover and press SmartCode button


Yale Touchscreen Deadbolt Door Lock

1. Touch screen with the back of your hand or fingers to activate

2. Enter 8-digit Master PIN code then press Gear_Icon.jpg, lock should sound Happy tone

3. Press 7 then Gear_Icon.jpg, lock should sound Happy tone

4. Press 1 then Gear_Icon.jpg, lock should sound Happy tone and exit

Door_Lock_10.jpg ADC-T2000 Thermostat

1. Press MODE button to display temperature, press MODE until heat/cool icons disappear

T2000_Setup_03.jpg T2000_Setup_02.jpg

2. Hold DOWN ARROW until Radio Wave Icon appears below temperature display

T2000_Setup_03.jpg ADC-T3000 Thermostat

1. Press MENU button to display Menu then press DOWN ARROW until SETTINGS

Alarm.com_ADC-T3000_Learn_00.jpg Alarm.com_ADC-T3000_Learn_01.jpg

2. Press ENTER button to select then press DOWN ARROW until NETWORK

Alarm.com_ADC-T3000_Learn_02.jpg Alarm.com_ADC-T3000_Learn_03.jpg

3. Press ENTER button to select then press UP or DOWN ARROW to highlight ADD

Alarm.com_ADC-T3000_Learn_04.jpg Alarm.com_ADC-T3000_Learn_05b.jpg

4. Press ENTER button to select and start Z-Wave learn mode

Alarm.com_ADC-T3000_Learn_05.jpg Alarm.com_ADC-T3000_Learn_06.jpg

5. Learning may take up to 1 minute to complete and exit


Radio Thermostat CT-20 and GE Basic Thermostat

Remove top cover then press MATE button


Radio Thermostat CT30, CT100, CT101 Thermostat

1. Press MENU button, "r1" displays and MATE appears under antenna icon

Radio_Thermostat_CT100_01.jpg Radio_Thermostat_CT100_01.jpg

2. Press MATE under antenna which flashes, if successful LINK appears, press MENU to exit

Radio_Thermostat_CT100_04.jpg Radio_Thermostat_CT100_Link.jpg

Radio Thermostat CT110 Thermostat

Press left side Antenna button


GoControl or RCS Technologies TBZ-48 Thermostat

1. Hold FAN button 5 seconds until SETUP then press UP ARROW button until ZWAVE

GoControl_Thermostat_Learn_01.jpg GoControl_Thermostat_Learn_02.jpg

2. Press MODE button to select then press MODE button again to learn

GoControl_Thermostat_Learn_03.jpg GoControl_Thermostat_Learn_04.jpg

3. If successful press FAN button to exit, antenna icon appears by temperature display

GoControl_Thermostat_Learn_05.jpg GoControl_Thermostat_Learn_06.jpg

Trane Remote Energy Management Thermostat

Press LEFT button twice then scroll to Z-WAVE INSTALL and press SELECT button


Qolsys IQ Thermostat

Hold HOME button for 2 seconds until "NOC" then press PROGRAM button until "Srh"


Thermostat displays "done" if successful press Home button to exit

3.png 4.png

Linear GoControl G00Z Garage Door Controller

Press the MATE button, controller beeps once then 3 times if successful


If successful Simon XT beeps and displays number of devices in memory

Simon_XT_Z-Wave_Add_05.png Simon_XT_Then4.jpg Simon_XT_Z-Wave_Add_07.png

Hold # for 10 seconds to exit