GC2 GoControl - Add Z-Wave Light Module

1. Press SERVICES, then press Z-Wave button

1_Home_Disarmed_278x158.png 2_Z-Wave_Services_278x158.png

2. Press bottom right WRENCH button then enter Installer Code 1561

01_Z-Wave_Main.png 02_Enter_Code.png

3. Press ADD DEVICES to enter Z-Wave learn mode

03_Toolbox_Add.png 04_Add_Device_1.png

4. Press Mate button on light module twice to learn

Mate_Button_2.jpg 05_Add_Device_2.png

5. Wait 1 minute to learn, when finished press BACK or HOME button to exit

06_Add_Device_3.png 06_Add_Device_3a.png