GC2 GoControl - Add Z-Wave Device

This brief instructional video demonstrates how to successfully add a Z-Wave device to your 2GIG panel.


Step-by-Step Instructions:

1. Press services, then press the Z-Wave logo.

1_Home_Disarmed.png 2_Z-Wave_Services.png

2. Press the wrench button, then enter the default installer code 1561.

01_Z-Wave_Main.png 02_Enter_Code.png

3. Press add devices button to enter Z-Wave learn mode.

03_Toolbox_Add.png 04_Add_Device_1.png


GE Jasco Plug-in Lamp Appliance Module

Press the Mate button twice.

Z-Wave_Mate_Button_2.jpg

FortrezZ SSA1 Indoor Siren

Bring siren within 6' of GoControl then press the program switch twice.

FortrezZ_SSA1.jpg

Everspring SE812 Indoor Siren

Press the Link button inside the battery compartment 3 times.

Everspring_SE812_Siren_Strobe.jpg

GE Jasco Wall Dimmer Light Switch

Turn the light switch on and off.

Picture4.png

GE Jasco Wall AC Outlet

Double click button in the middle of the outlet.

final_nueve.jpg

Schlage Deadbolt Door Lock

1. Enter your 6-digit programming code provided in the Schlage documentation.

2. Press the Schlage button, then 0. The Schlage button flashes orange

hero_01.png

Kwikset Deadbolt Door Lock

Open the battery cover and press the left SmartCode button.

final_diez_2.jpgfinal_diez.jpg

Yale Touchscreen Deadbolt Door Lock

1. Touch screen to activate the device.

2. Enter your 4 to 8-digit Master Code then press #. The lock will play the Happy tone.

3. Press 7 then # to learn. Again, the lock will play the Happy tone.

0cd5bc9a8410e9b34132defb5bd76b5b08fd4e90_lock-clearcut.jpg

GE Radio Thermostat CT20 and GE IS-ZW-TSTAT-100 Thermostat
Remove top cover then press the MATE button.

Radio_Thermostat_CT20.jpg

Alarm.com ADC-T2000 Thermostat

1. Press the Mode button to display the temperature, and press the Mode button until heat/cool icons disappear.

T2000_Setup_03.jpg T2000_Setup_02.jpg

2. Hold the down arrow until Radio Wave Icon appears below the temperature display.

T2000_Setup_03.jpg

Alarm.com ADC-T3000 Thermostat

1. Press the Menu button to display Menu, then press the down arrow until Settings appears.

Alarm.com_ADC-T3000_Learn_00.jpg Alarm.com_ADC-T3000_Learn_01.jpg

2. Press the enter button to select, then press the down arrow until Network appears.

Alarm.com_ADC-T3000_Learn_02.jpg Alarm.com_ADC-T3000_Learn_03.jpg

3. Press the enter button to select, then press the up arrow or down arrow to highlight add.

Alarm.com_ADC-T3000_Learn_04.jpg Alarm.com_ADC-T3000_Learn_05b.jpg

4. Press the enter button to select and start Z-Wave learn mode.

Alarm.com_ADC-T3000_Learn_05.jpg Alarm.com_ADC-T3000_Learn_06.jpg

5. Learning may take up to 1 minute to complete and exit.

Alarm.com_ADC-T3000_Learn_07.jpg

Radio Thermostat CT30, CT100, CT101

Radio_Thermostat_CT100_Front_Small.jpg

1. Press the thermostat menu button, and r1 displays. Mate appears under the antenna icon.

Radio_Thermostat_CT100_Learn_01_Press_Menu.jpg Radio_Thermostat_CT100_Learn_02_Press_Mate.jpg

2. Press the mate button again, and mate begins flashing.

Radio_Thermostat_CT100_Learn_03_Mate_Flashes.jpg Radio_Thermostat_CT100_Learn_03_Mate_Flashes__1_.jpg

3. The thermostat will display link under the antenna icon. Press the menu button to exit.

Radio_Thermostat_CT100_Learn_03_Mate_Flashes__2_.jpg

Radio Thermostat CT110 Thermostat

Press the dedicated Z-Wave Mate Button located on the side of the device to pair.

Radio_Thermostat_CT110.jpg

GoControl RCS Technologies TBZ-48 Thermostat

1. Hold the Fan button 5 seconds until Setup appears. Press the up arrow button until ZWAVE is displayed.

GoControl_Thermostat_Learn_01.jpgGoControl_Thermostat_Learn_02.jpg

2. Press the Mode button to select, then press Mode button again to learn.

GoControl_Thermostat_Learn_03.jpgGoControl_Thermostat_Learn_04.jpg

3. Press the Fan button to exit, and the antenna icon appears by the temperature display.

GoControl_Thermostat_Learn_05.jpgGoControl_Thermostat_Learn_06.jpg

Trane Thermostat

TZEMT400BB32MAA_Front_1.jpg

1. Press the left button twice, then press Scroll Down to ZWave Install. Press Select.

Trane_TZ45_Learn_01.png Trane_TZ45_Learn_02.png

2. Press the Scroll Up button for Yes to begin Z-Wave enrollment.

Trane_TZ45_Learn_03.png Trane_TZ45_Learn_04.png

3. When finished, the display returns to the main menu. Press Done to exit.

Trane_TZ45_Learn_05.png

Linear GoControl Garage Door Controller

Press the Mate button. The linear controller sounds 1 beep then 3 beeps when successful.

Linear_GD00Z-7_Garage_Door_Controller.jpg

5. Learning may take up to 2 minutes, press Back or Home to exit.

05_Add_Device_2.png 06_Add_Device_3a.png