Qolsys Door Window Sensor Batteries

Find the image of your door/window sensor below to view instructions on how to complete your battery replacement.


Qolsys QS1135-840 Door/Window Sensor:

Insert a screwdriver into the slot found on the top/bottom of the cover to remove, then remove and replace 2 CR2032 batteries.

001a.2_Qolsys_Door_Sensor_Batteries.jpg

Line.jpg

Interlogix 60-362N-10 Door/Window Sensor:

Press end latch to remove the cover, then remove and replace the CR123A lithium battery.

002a.2_Interlogix_Door_Sensor_Batteries_2.jpg

Line.jpg

Ecolink TX-E201 Door/Window Sensor:

Slide cover up to remove, then remove and replace the CR2032 lithium battery.

003a.2_Ecolink_Door_Sensor_Batteries_3.jpg

Line.jpg

Interlogix / GE Security TX-1012-01 Micro Door/Window Sensor:

Insert a coin or screwdriver into the slot and twist to open, using a screwdriver to then pry open the inside cover. Remove and replace CR2032 battery.

004a.2_Interlogix-GE_Security_TX-1012-01_Micro_DW_Sensor.png

Line.jpg

Interlogix 60-688-95 Micro Door/Window Sensor:

Use a screwdriver to pry open the backplate, then pry off the cover. Remove and replace CR2032 battery.

005a.2_Interlogix_60-688-95__Micro_DW_Sensor.png


Chat