ADC-V622 Indoor 180° HD Camera Guide

Specifications

  • Digital pan tilt, camera lens takes very large image and pans around it
  • 1920 x 1080 pixel video resolution
  • 15' night vision range
  • Field of view 180° Horizontal and vertical
  • 2-Way Talk / Listen
  • Bluetooth connection to Smartphone, can act as an external speaker
  • WiFi 802.11 b/g/n
  • Ethernet connection
  • Operating Temperature 32°F to 104°F

ADC-V622_Pan_Tilt_Camera_Information.jpg

Default Camera

Warning! Erases everything, camera must be re-added to Alarm.com and WiFi configured

1. Press MENU button, camera says "Menu, use volume buttons to scroll through options"

ADC-V622_Pan_Tilt_Camera_Default_1.jpg

2. Press + button until "Factory Reset press the menu button to activate"

ADC-V622_Pan_Tilt_Camera_Default_2.jpg

3. Press top MENU button, camera says "Press menu button again to confirm factory reset"

ADC-V622_Pan_Tilt_Camera_Default_1.jpg

4. Press top MENU button again, camera says "Resetting"

WiFi setup using WPS Enrollment

1. Press MENU button, camera says "Menu, use volume buttons to scroll through options"

ADC-V622_Pan_Tilt_Camera_Default_1.jpg

2. Press + button until "WPS press the menu button to activate", press MENU button

ADC-V622_Pan_Tilt_Camera_Default_2.jpg ADC-V622_Pan_Tilt_Camera_Default_1.jpg

3. Camera says "WPS activated press any button to exit", front LED flashes blue

ADC-V622_Pan_Tilt_Camera_LED_Blue.jpg

4. Press and release router's WPS button or enable WPS mode in router programming

Router_WPS_Button.jpg

5. If successful after 1 minute the camera LED turns green

ADC-V622_Pan_Tilt_Camera_LED_Green.jpg

WiFi Setup by AP Access Point

1. Press top MENU button, camera says "Menu, use volume buttons to scroll through options"

ADC-V622_Pan_Tilt_Camera_Default_1.jpg

2. Press + button until "Access Point, press menu button to activate", press MENU button

ADC-V622_Pan_Tilt_Camera_Default_2.jpg ADC-V622_Pan_Tilt_Camera_Default_1.jpg

3. Front status light flashes blue

ADC-V622_Pan_Tilt_Camera_LED_Blue.jpg

4. Go to smartphone WiFi settings, look for ALARM xx:xx:xx then press CONNECT

ADC-V622_AP_Setup_01.png ADC-V622_AP_Setup_02.png ADC-V622_AP_Setup_03.png

5. Open web browser, enter 192.168.1.1, camera menu appears, press SCAN

ADC-V622_AP_Setup_04.png ADC-V622_AP_Setup_05.png ADC-V622_AP_Setup_06.png

6. Swipe down then select WiFi network then swipe up

ADC-V622_AP_Setup_07.png ADC-V622_AP_Setup_08.png ADC-V622_AP_Setup_09.png

7. Enter WiFi encryption then press SUBMIT then OK. Camera beeps, green LED turns ON

ADC-V622_AP_Setup_10.png ADC-V622_AP_Setup_11.png ADC-V622_AP_Setup_12.png

Hardwire Connection to Router

ADC-V622_Pan_Tilt_Camera_Connect_To_Router.jpg

Add Camera using the Brinks Home™ App Website

Note: The camera must first be connected to Wi-Fi.

 

1. Log in to the Brinks Home App and press Video.

001_Brinks_Home_App__Desktop__Home.png

 

2. Select Settings.

002_Brinks_Home_App__Desktop__Video-Live_Video_Default.png

 

3. Scroll to the bottom of the page and select Add video device.

003_Brinks_Home_App__Desktop__Video_Settings.png

 

4. The camera should be detected. Enter the camera name, then select Install.

004_Brinks_Home_App__Desktop__Name_Camera_and_Install.png

 

5. The camera is added to the network, which can take several minutes.

005_Brinks_Home_App__Desktop__Cam_Configuration.png

 

6. When finished, select Live View to view images from a newly installed camera.

006_Brinks_Home_App__Desktop__Complete.png

 

 

Add Camera using the Brinks Home™ Mobile App

Note: The camera must first be connected to Wi-Fi.

 

1. Log in to the Brinks Home App and press Video (found under the menu icon in the top left corner.

001a_Mobile_App_Home_Clean.jpg 001b_Mobile_App_Menu_Clean.jpg

2. Select Settings by pressing the Gear icon in the upper, right-hand corner.

002a_Mobile_App_Video-Gear_Clean.jpg

 

3. Select Add video device, then select your compatible device type.

003a_Mobile_App_Add-Video_Clean.jpg 003b_Mobile_App_Select-Device_Clean

4. The camera should be detected. Enter the camera name, then select Next.

004a_Mobile_App_Name_Device_Clean.jpg

 

5. The camera may take several minutes to configure.

005a_Mobile_App_Connect_Device_Clean.jpg 005b_Mobile_App_Verify_LED_Clean.jpg

6. When finished, select Live View to view images from a newly installed camera.

006a_Mobile_App_Live_View_Clean.jpg

 

Troubleshooting

  • Power cycle the camera by unplugging and plugging in power adapter
  • Move closer to WiFi router
  • If issues persist, try resetting the camera to factory defaults

LED Reference Guide

  • Solid Green = Local network and Internet connection OK
  • Flashing Green = Local network connection OK, Internet connection bad
  • Solid Red = No local network or Internet connection
  • Flashing Red = Camera booting
  • Flashing Blue = Camera in WPS WiFi learn mode
  • Flashing White = Camera in WiFi AP learn mode
  • Flashing Yellow = Camera in Bluetooth Pairing mode


Chat