ADC-V523 Indoor Camera Guide

Specifications

  • 1920 x 1080p video resolution
  • HDR High Dynamic Range video recording
  • 15' night vision range
  • 117° horizontal and vertical field of view
  • 2-Way Talk/Listen
  • Micro SD slot (not functional at this time)
  • WiFi 802.11 b/g/n
  • Ethernet connection
  • Operating temperature 32° F to 104° F

ADC-V523_Indoor_Camera.jpg

 

Factory Default

Warning! Erases everything, camera must be re-added to Alarm.com and Wi-Fi configured

Remove bottom rubber cover and hold WPS button for 15 seconds

ADC-V523_Indoor_Camera_WPS_Default_Button.jpg

 

Pre-installation Steps

This brief video reviews pre-installation steps for the Brinks Home Indoor Camera (ADC-V523):

 

Wi-Fi Setup by WPS Enrollment

This brief instructional video demonstrates how to successfully pair the Brinks Home Indoor Camera (ADC-V523) to a router using WPS mode:

 

Step-by-step instructions:

1. Hold the WPS button for 3 seconds until the front LED flashes blue

ADC-V523_Indoor_Camera_WPS_Connection.jpg

 

2. Press and release the router's WPS button or enable WPS in router programming

Router_WPS_Button.jpg

 

3. Wait 2 minutes for the camera LED to flash, then turn solid green if successful

ADC-V523_Indoor_Camera_Green_Light.jpg

Note: If WPS Mode fails, try Access Point Mode

 

Wi-Fi Setup by Access Point

This brief instructional video demonstrates how to successfully pair the Brinks Home Indoor Camera (ADC-V523) to a router using Access Point (AP) mode:

 

Add Camera using the Brinks Home™ App Website

Note: The camera must first be connected to Wi-Fi.

 

1. Log in to the Brinks Home App and press Video.

001_Brinks_Home_App__Desktop__Home.png

 

2. Select Settings.

002_Brinks_Home_App__Desktop__Video-Live_Video_Default.png

 

3. Scroll to the bottom of the page and select Add video device.

003_Brinks_Home_App__Desktop__Video_Settings.png

 

4. The camera should be detected. Enter the camera name, then select Install.

004_Brinks_Home_App__Desktop__Name_Camera_and_Install.png

 

5. The camera is added to the network, which can take several minutes.

005_Brinks_Home_App__Desktop__Cam_Configuration.png

 

6. When finished, select Live View to view images from a newly installed camera.

006_Brinks_Home_App__Desktop__Complete.png

 

 

Add Camera using the Brinks Home™ Mobile App

Note: The camera must first be connected to Wi-Fi.

 

Video Instructions:

1. Log in to the Brinks Home App and press Video (found under the menu icon in the top left corner.

001a_Mobile_App_Home_Clean.jpg 001b_Mobile_App_Menu_Clean.jpg

2. Select Settings by pressing the Gear icon in the upper, right-hand corner.

002a_Mobile_App_Video-Gear_Clean.jpg

 

3. Select Add video device, then select your compatible device type.

003a_Mobile_App_Add-Video_Clean.jpg 003b_Mobile_App_Select-Device_Clean

4. The camera should be detected. Enter the camera name, then select Next.

004a_Mobile_App_Name_Device_Clean.jpg

 

5. The camera may take several minutes to configure.

005a_Mobile_App_Connect_Device_Clean.jpg 005b_Mobile_App_Verify_LED_Clean.jpg

6. When finished, select Live View to view images from a newly installed camera.

006a_Mobile_App_Live_View_Clean.jpg

 

Troubleshooting

  • Power cycle the camera by unplugging and plugging in power adapter
  • Move closer to Wi-Fi router
  • If issues persist, try resetting the camera to factory defaults

 

LED Reference Guide

  • Solid Green = Local network and Internet connection OK
  • Flashing Green = Local network connection OK, Internet connection bad
  • Solid Red = No local network or Internet connection
  • Flashing Red = Camera booting
  • Flashing Blue = Camera in WPS Wi-Fi learn mode
  • Flashing White = Camera in Wi-Fi AP learn mode
  • Flashing Yellow = Camera in Bluetooth Pairing mode

Chat