ADC-V610PT Indoor Pan Tilt Camera Guide

This camera is discontinued but can still be added and viewed on an Alarm.com account.

Specifications

  • 640 x 480 pixel video resolution
  • 43.6° horizontal, 33.4° vertical field of view
  • 90° horizontal x 57° vertical pan tilt range
  • WiFi 802.11 b/g
  • Ethernet connection
  • Operating Temperature 32°F to 104°F

ADC-V610PT_Pan_Tilt_Camera_Information.jpg

Factory Default

Warning! Erases everything, camera must be re-added to Alarm.com and WiFi configured

Insert pin into reset hole and hold internal button 60 seconds until front LED flashes red

ADC-V610PT_Pan_Tilt_Factory_Default.jpg

Hardwire Connection To Router

Note: This is required to configure WiFi and add camera to customer's account

Plug Ethernet cable into back of camera and into port on customer's WiFi network router

ADC-V610PT_Pan_Tilt_Camera_Connect_To_Router.jpg

Add Camera using the Brinks Home™ App Website

Note: the camera must first be connected to Wi-Fi.

1. Log in to the Brinks Home App and press Video.

001_Brinks_Home_App__Desktop__Home.png

 

2. Select Settings.

002_Brinks_Home_App__Desktop__Video-Live_Video_Default.png

 

3. Scroll to the bottom of the page and select Add video device.

003_Brinks_Home_App__Desktop__Video_Settings.png

 

4. The camera should be detected. Enter the camera name, then select Install.

004_Brinks_Home_App__Desktop__Name_Camera_and_Install.png

 

5. The camera is added to the network, which can take several minutes.

005_Brinks_Home_App__Desktop__Cam_Configuration.png

 

6. When finished, select Live View to view images from a newly installed camera.

006_Brinks_Home_App__Desktop__Complete.png

 

 

Add Camera using the Brinks Home™ Mobile App

Note: The camera must first be connected to Wi-Fi.

 

1. Log in to the Brinks Home App and press Video (found under the menu icon in the top left corner.

001a_Mobile_App_Home_Clean.jpg 001b_Mobile_App_Menu_Clean.jpg

2. Select Settings by pressing the Gear icon in the upper, right-hand corner.

002a_Mobile_App_Video-Gear_Clean.jpg

 

3. Select Add video device, then select your compatible device type.

003a_Mobile_App_Add-Video_Clean.jpg 003b_Mobile_App_Select-Device_Clean

4. The camera should be detected. Enter the camera name, then select Next.

004a_Mobile_App_Name_Device_Clean.jpg

 

5. The camera may take several minutes to configure.

005a_Mobile_App_Connect_Device_Clean.jpg 005b_Mobile_App_Verify_LED_Clean.jpg

6. When finished, select Live View to view images from a newly installed camera.

006a_Mobile_App_Live_View_Clean.jpg

 

Troubleshooting

  • Power cycle the camera by unplugging and plugging in power adapter
  • Move closer to WiFi router
  • If issues persist, try resetting the camera to factory defaults

LED Reference Guide

  • Green ON = Connected to Internet
  • Red ON = WiFi or Ethernet connection problem
  • Red Blink = Factory reset or firmware upgrade in progress
  • Red Blink = Camera being factory reset

Chat