ADC-V522IR Indoor Camera Guide

Specifications

1920 x 1080p video resolution
113° horizontal and vertical field of view
15' night vision range
802.11 b/g/n Wi-Fi
Ethernet connection
Micro SD card slot (not functional at this time)
2-way audio
Operating Temperature 32°F to 104°F

Factory Default

Warning! Erases everything, camera must be re-added to Alarm.com and Wi-Fi configured

Insert paper clip into reset hole and hold internal button for 15 seconds

Wi-Fi Setup by WPS Mode

1. Insert paper clip into reset hole and hold internal button 5 seconds until LED flashes blue

2. Press and release router WPS button or enable WPS in router programming

3. Camera LED turns green after 1 minute if successful

Wi-Fi Setup by Access Point

1. Insert paper clip into reset hole and hold internal button 6 seconds until LED flashes white

2. Go to smartphone Wi-Fi settings, select ALARM xx:xx:xx then press CONNECT

3. Open web browser and enter 192.168.1.1, camera menu appears, select language

4. Press SCAN FOR WI-FI NETWORKS, when found select Wi-Fi network

5. Select SECURITY KEY, enter Wi-Fi encryption key, press SAVE, then OK to exit

6. Camera green LED turns ON if successful

Hardwire Connection to Router

Connect Ethernet cable from camera to port on back of router and power up camera

Add Camera using the Brinks Home™ App Website

Note: The camera must first be connected to Wi-Fi.

1. Log in to the Brinks Home App and press Video.

2. Select Settings.

002_Brinks_Home_App__Desktop__Video-Live_Video_Default.png

3. Scroll to the bottom of the page and select Add video device.

4. The camera should be detected. Enter the camera name, then select Install.

004_Brinks_Home_App__Desktop__Name_Camera_and_Install.png

5. The camera is added to the network, which can take several minutes.

6. When finished, select Live View to view images from a newly installed camera.

Add Camera using the Brinks Home™ Mobile App

Note: The camera must first be connected to Wi-Fi.

1. Log in to the Brinks Home App and press Video (found under the menu icon in the top left corner.

2. Select Settings by pressing the Gear icon in the upper, right-hand corner.

3. Select Add video device, then select your compatible device type.

003b_Mobile_App_Select-Device_Clean

4. The camera should be detected. Enter the camera name, then select Next.

5. The camera may take several minutes to configure.