2GIG-HD100 Indoor Camera Guide

Specifications

  • 1280 x 720 pixel video resolution
  • 75° vertical and horizontal field of view
  • 16' Night vision range
  • WiFi 802.11 b/g/n WiFi
  • Ethernet connection
  • Operating Temperature 32°F to 104°F

2GIG-HD100_Indoor_Camera_Information.jpg

Factory Default

Warning: Erases everything, camera must be re-added to your account.

Hold B button on the back of the camera for 15 seconds until front LED turns yellow.

2GIG-HD100_Default_Button.jpg2GIG-HD100_Camera_Yellow_LED.jpg

WiFi Setup by WPS Enrollment

1. Hold the A button 3 for seconds until LED flashes yellow.

2GIG-HD100_WPS_Button.jpg2GIG-HD100_Camera_Yellow_LED.jpg

2. Press and release the WPS button on router or enable WPS in router programming.

Router_WPS_Button.jpg

3. The front LED turns green if successful.

2GIG-HD100_Camera_Green_LED.jpg

Hardwire Connection to Router

Plug Ethernet cable into back of camera and unused port in back of network router.

2GIG-HD100_Connect_To_Router.jpg

Add Camera using the Brinks Home™ App Website

Note: the camera must first be connected to Wi-Fi.

1. Log in to the Brinks Home App and press Video.

001_Brinks_Home_App__Desktop__Home.png

 

2. Select Settings.

002_Brinks_Home_App__Desktop__Video-Live_Video_Default.png

 

3. Scroll to the bottom of the page and select Add video device.

003_Brinks_Home_App__Desktop__Video_Settings.png

 

4. The camera should be detected. Enter the camera name, then select Install.

004_Brinks_Home_App__Desktop__Name_Camera_and_Install.png

 

5. The camera is added to the network, which can take several minutes.

005_Brinks_Home_App__Desktop__Cam_Configuration.png

 

6. When finished, select Live View to view images from a newly installed camera.

006_Brinks_Home_App__Desktop__Complete.png

 

 

Add Camera using the Brinks Home™ Mobile App

Note: The camera must first be connected to Wi-Fi.

 

1. Log in to the Brinks Home App and press Video (found under the menu icon in the top left corner.

001a_Mobile_App_Home_Clean.jpg 001b_Mobile_App_Menu_Clean.jpg

2. Select Settings by pressing the Gear icon in the upper, right-hand corner.

002a_Mobile_App_Video-Gear_Clean.jpg

 

3. Select Add video device, then select your compatible device type.

003a_Mobile_App_Add-Video_Clean.jpg 003b_Mobile_App_Select-Device_Clean

4. The camera should be detected. Enter the camera name, then select Next.

004a_Mobile_App_Name_Device_Clean.jpg

 

5. The camera may take several minutes to configure.

005a_Mobile_App_Connect_Device_Clean.jpg 005b_Mobile_App_Verify_LED_Clean.jpg

6. When finished, select Live View to view images from a newly installed camera.

006a_Mobile_App_Live_View_Clean.jpg

 

Troubleshooting

  • Power cycle the camera by unplugging and plugging in power adapter.
  • Move closer to WiFi router.
  • If issues persist, try resetting the camera to factory defaults.

LED Reference Guide

  • Green = Normal operation
  • Red Flashing = WiFi or Ethernet connection problem
  • Yellow = Camera is booting
  • Yellow Flashing = WPS WiFi enrollment mode enabled

Chat