ADC-V721/V722 Outdoor Camera Guide

Please note this camera is discontinued, but can still be added and viewed on your Brinks Home App account.

Specifications

  • 1920 x 1080 pixel video resolution
  • 88° horizontal and vertical field of view
  • 40' night vision
  • Wi-Fi 802.11 b/g/n
  • Operating temperature -4 °F to -122°F

Factory Default

Warning! Erases everything, the camera must be re-added to Alarm.com and Wi-Fi configured

Hold back the button for 15 seconds until LED flashes red and green

ADC-V721W_Outdoor_Bullet_Camera_Factory_Default.jpg

Wi-Fi Setup by WPS Enrollment

1. Hold back button for 5 seconds, LED flashes blue

ADC-V721W_Outdoor_Bullet_Camera_WPS_Button.jpg

2. Press and release the WPS button on the router or enable WPS mode in router programming

Router_WPS_Button.jpg

3. After 2 minutes camera LED turns green if successful or red if failure

ADC-V721W_Outdoor_Bullet_Camera_Green_LED.jpg

Wi-Fi Setup by Access Point

1. Hold back button for 6 seconds until LED flashes white

ADC-V721W_Outdoor_Bullet_Camera_White_LED.jpg

2. Go to smartphone Wi-Fi settings, select ALARM (xx:xx: xx), then press CONNECT

ADC-V721W_WiFi_Setup_01_WiFi.png ADC-V721W_WiFi_Setup_02_Select_Camera_Network.png ADC-V721W_WiFi_Setup_03_Select_Camera_Network_.png

3. Open web browser and enter 192.168.1.1, camera menu appears, select language

ADC-V721W_WiFi_Setup_04_Connected.png ADC-V721W_WiFi_Setup_05_Enter_Address.png ADC-V721W_WiFi_Setup_06_Web_Main_.png

4. Press SCAN FOR WI-FI NETWORKS, when found select Wi-Fi network

ADC-V721W_WiFi_Setup_07_Scan_For_WiFi_Networks.png ADC-V721W_WiFi_Setup_08_Scanning_.png ADC-V721W_WiFi_Setup_09_Select_WiFi_Network.png

5. Press SECURITY KEY, enter Wi-Fi encryption key, press SAVE, then OK to exit

ADC-V721W_WiFi_Setup_10_Select_Encryption.png ADC-V721W_WiFi_Setup_11_Enter_Encryption.png ADC-V721W_WiFi_Setup_12_Connecting.png

6. Camera LED turns green if successful or red if failure

ADC-V721W_Outdoor_Bullet_Camera_Green_LED.jpg

Add Camera using the Brinks Home App Website

Note: The camera must be connected by Wi-Fi to the customer's router

1. Login to the Brinks Home App website (powered by Alarm.com) and press VIDEO

01_Home_Page.png

2. Select SETTINGS

02_Video_Page.png

3. Scroll to the bottom of the page and select ADD VIDEO DEVICE

03_Video_Settings.png

4. Camera should be detected, enter camera name, then select INSTALL

04_Add_V722W_Outdoor_Camera_-_Camera_Found.png

5. The camera is added to the network, which can take several minutes

05_Add_V722W_Outdoor_Camera_-_Configuring.png

6. When finished select LIVE VIEW to view images from newly installed camera

06_Add_V722W_Outdoor_Camera_-_Installation_Complete.png

Add Camera using the Brinks Home Mobile App

Note: Camera must be connected to customer's router by Wi-Fi

1. Press the top left Bars to access the menu, press VIDEO, then press the upper right GEAR icon

ADC-V721W_Setup_by_App_01.png ADC-V721W_Setup_by_App_02.png ADC-V721W_Setup_by_App_03.png

2. Press ADD VIDEO DEVICE, press INSTALL, enter camera name, then press NEXT

ADC-V721W_Setup_by_App_04.png ADC-V721W_Setup_by_App_05.png ADC-V721W_Setup_by_App_06.png

3. Camera may take several minutes to configure, then press X at top left to exit

ADC-V721W_Setup_by_App_07.png ADC-V721W_Setup_by_App_08.png ADC-V721W_Setup_by_App_09.png

Troubleshooting

  • Power cycle the camera by unplugging and plugging in the power adapter
  • Move camera closer to the Wi-Fi router
  • If issues persist, try resetting the camera to factory defaults and reinstalling

LED Reference Guide

  • Off - no power
  • Green on - internet and Alarm.com connection ok
  • Red on - no local or internet connection
  • Red blink - factory reset or firmware upgrade
  • Red on - no access to the internet or Alarm.com

Tags: V722W, ADC-V722W, Alarm.com, Camera, Outdoor Camera


Chat