ADC-700X Outdoor Camera Guide

This camera is discontinued but can still be added and viewed on Alarm.com account

Specifications

  • 640 x 480 pixel video resolution
  • 40 feet night vision range
  • Field of view 56° Horizontal 42° Vertical
  • Ethernet connection only no WiFi
  • Supports POE Power Over Ethernet
  • Operating Temperature -4°F to 122°F

ADC-V700X_Outdoor_Bullet_Camera_Information.jpg

Factory Default

1. Remove wiring cover and rubber insert then carefully unscrew back of camera

2. Hold reset button for 90 seconds until LED flashes red

ADC-V700X_Outdoor_Camera_Factory_Default.jpg

Hardwire Connection to Router

Connect Ethernet cable from camera to unused port on network router

ADC-V700X_Outdoor_Camera_Connect_To_Router.jpg

Power over Ethernet to Router

ADC-V700X_Outdoor_Camera_Connect_To_Power_Over_Ethernet_Injector.jpg

Add Camera using the Brinks Home™ App Website

Note: the camera must first be connected to Wi-Fi.

1. Log in to the Brinks Home App and press Video.

001_Brinks_Home_App__Desktop__Home.png

 

2. Select Settings.

002_Brinks_Home_App__Desktop__Video-Live_Video_Default.png

 

3. Scroll to the bottom of the page and select Add video device.

003_Brinks_Home_App__Desktop__Video_Settings.png

 

4. The camera should be detected. Enter the camera name, then select Install.

004_Brinks_Home_App__Desktop__Name_Camera_and_Install.png

 

5. The camera is added to the network, which can take several minutes.

005_Brinks_Home_App__Desktop__Cam_Configuration.png

 

6. When finished, select Live View to view images from a newly installed camera.

006_Brinks_Home_App__Desktop__Complete.png

 

 

Add Camera using the Brinks Home™ Mobile App

Note: The camera must first be connected to Wi-Fi.

 

1. Log in to the Brinks Home App and press Video (found under the menu icon in the top left corner.

001a_Mobile_App_Home_Clean.jpg 001b_Mobile_App_Menu_Clean.jpg

2. Select Settings by pressing the Gear icon in the upper, right-hand corner.

002a_Mobile_App_Video-Gear_Clean.jpg

 

3. Select Add video device, then select your compatible device type.

003a_Mobile_App_Add-Video_Clean.jpg 003b_Mobile_App_Select-Device_Clean

4. The camera should be detected. Enter the camera name, then select Next.

004a_Mobile_App_Name_Device_Clean.jpg

 

5. The camera may take several minutes to configure.

005a_Mobile_App_Connect_Device_Clean.jpg 005b_Mobile_App_Verify_LED_Clean.jpg

6. When finished, select Live View to view images from a newly installed camera.

006a_Mobile_App_Live_View_Clean.jpg

 


Chat