GC2 GoControl - Sensor Test

System Test Instructions

1. Press security, then menu.

User_Menu_-_Bypass_01.png User_Menu_-_Alarm_History_01.png

2. Press toolbox, then enter your master code.

User_Menu_-_Alarm_History_02.png User_Menu_-_Alarm_History_03.png

3. Press system test. GoControl will enter test mode.

User_Menu_-_System_Test_00.png User_Menu_-_System_Test_01.png

4. Open the door and window sensors, and walk by motion detectors.

Open_Close_Door.jpg White_Open_Window.jpg Motion_Detector_Test.jpg

5. The GoControl beeps and shows signal strength if all sensors test successfully. Press OK for next steps.

User_Menu_-_System_Test_02.png User_Menu_-_System_Test_06.png

6. Test the home button colors by pressing each test.

User_Menu_-_Console_Test_00.png User_Menu_-_Console_Test_01.png

7. Press no or yes. When finished press the down arrow.

User_Menu_-_Console_Test_02.png User_Menu_-_Console_Test_03.png

8. Test the emergency button by pressing each test then press no or yes.

User_Menu_-_Console_Test_04.png User_Menu_-_Console_Test_04a.png

9. Press sounder audio test then press no or yes if the internal speaker sounds.

User_Menu_-_Console_Test_05.png User_Menu_-_Console_Test_06.png

10. If all tests are successful a bottom right ok button appears. Press ok, then back to exit.

User_Menu_-_Console_Test_07.png User_Menu_-_System_Test_10.png


Chat