Lynx Touch - Replace Backup Battery

This process will require you to have a Honeywell LYNXRCHKIT-SC 7.2 Volt 1100 mA battery. This battery can often be purchased at your local hardware, mass retailer, or battery store.

1. Press the top tabs with a screwdriver, then pull the front face-plate down.

Lynx_Plus_Battery_1.jpg

2. Remove the battery holder screw, then unplug the battery from circuit board to remove it.

Lynx_Touch_Battery_Replacement.jpg

3. Remove and replace the Honeywell LYNXRCHKIT-SC 7.2 Volt 1100 mA battery.

Lynx_Plus_Battery_3.jpg