Lynx Touch—Program Wi-Fi by WPS

1. Press SECURITY then press bottom right MORE tab

Add_User_Code_01_Main.jpg Add_User_Code_02_Security_1.jpg

2. Press TOOLS then enter the Master Code

Add_User_Code_03_Security_2.jpg Add_User_Code_04_Enter_Code.jpg

3. Press WiFi CONFIG then press WPS button or enable WPS in router programming

WiFi_Program_01_User_Menu.jpg Router_WPS_Button.jpg

4. Press WPS on Lynx Touch to begin WiFi enrollment

WiFi_Program_07_WPS.jpg WiFi_Program_08_WPS_Operation.jpg

5. If successful press OK to finish then BACK ARROW to exit

WiFi_Program_09_Joined.jpg WiFi_Program_10_Done.jpg

7. Press BACK ARROW again or the HOME button to exit programming

WiFi_Program_11_WiFi_Main_Exit.jpg Lynx_Touch_L5210_Home_Button.jpg