GC2/GC2E - Replace Backup Battery

Follow the steps below to replace the IQ Panel 2 backup battery:

1. Pull the front faceplate from the panel.

 

2. Loosen the top and bottom screws, then insert a screwdriver into the slots and pry from the backplate.

 

3. Hang the panel from the backplate using the plastic strap.

 

4. Unplug and remove the old battery from the holder, then replace it with a new 2GIG-BATT2X battery pack.

 

 

5. Place panel back onto backplate, then tighten the top and bottom screws.

 

6. Place the faceplate back on the panel.