IQ Panel Cover Tamper Alert

Please follow the steps below to address the Qolsys IQ panel cover tamper alert:

  1. Remove the screw on the top of the panel
    • 001_-_DSC_SCW9067_Circuit_Board.png
  2. Pull the panel from the backplate and take note of the tamper switch placement
    • 002b_-_DSC_SCW9067_Circuit_Board.png
  3. Return the panel onto the backplate and verify the tamper spring is pressed down
  4. Verify that the trouble alert is cleared and replace the screw on top to secure it into place

Tips to resolve the cover tamper issue:

    • Ensure batteries fit within their intended compartment
    • Ensure the cover is replaced snugly into its designed casing
    • Ensure any fasteners, such as screws or tabs, are tightened or securely locked into place
    • Additional action may be required at the panel to fully clear the error
    • For more information about what may cause tamper activity, please click on the link provided.