ADC-V826 Outdoor Dome Camera

Specifications

  • • 1920 x 1080p pixel video resolution
  • • 108° vertical and horizontal field of view
  • • 95' night vision range
  • • 10/100 Mbps Ethernet connection
  • • POE Power Over Ethernet compatible
  • • Operating temperature -22°F to 140°F

ADC-VC826_Dome_Camera_Information.jpg

Factory Default

Warning: Running a factory default erases all stored camera information, and the camera must be re-added to Alarm.com and Wi-Fi configured.

Hold the reset button while powering up and continue holding for 10 seconds.

ADC-VC825_Dome_Camera_Reset_Button_309x219.jpg

Hardwire Connection To Router

Connect the Ethernet cable from the camera to the network router, apply camera power from the power supply, and wait for 2 to 3 minutes for the camera to boot.

ADC-V826_Dome_Camera_Connection_To_Router_833x180.jpg

Otherwise, connect the Ethernet cable from the network router to the POE (Power Over Ethernet) module, and connect by Ethernet cable to the camera.

ADC-VC826_Dome_Camera_Connection_to_POE_Injector.jpg

Add Camera using Customer Website

Note: Camera must be connected to router by Ethernet cable

1. Log in to Alarm.com customer website and select Video.

01_Home_Page.png

2. Click on Settings.

02_Video_Page.png

3. Scroll to the bottom of the page and select Add Video Device.

03_Video_Settings.png

4. The camera should be detected. Enter the camera name, then press Install.

04_Add_V610PT_Camera_-_Camera_Found.png

5. Alarm.com downloads information to the camera, which may take up to 5 minutes.

05_Add_V610PT_Camera_-_Configuring.png

6. When finished select Live View to view the camera.

06_Add_V610PT_Camera_-_Installation_Complete.png

7. To configure wireless click on Settings.

07_Add_Camera_-_Live_View_Program_Wireless.png

8. Scroll down to the bottom of the page then select Wireless Network.

08_Add_Camera_-_Select_Wireless_Settings.png

9. Click on Scan to scan for networks.

09_Add_Camera_-_Choose_Method.png

10. Select the Wi-Fi network from the list.

10_Add_Camera_-_Found_Networks.png

11. Enter the Wi-Fi encryption, then select Next.

10_Add_Camera_-_Enter_Encryption.png

12. Remove camera power and unplug the Ethernet cable, then power up and wait 2 minutes.

11_Add_V610PT_Camera_-_Wireless_Complete.png

Add Camera using Brinks Home Mobile App

Note: Camera must be connected to router by Wi-Fi or Ethernet Connection.

1. Log in to the Brinks Home Mobile App. Tap on the menu button (3 bars in the top left corner of the app). Press Video, then press the gear icon on the top right corner of the app.

ADC-V610PT_Setup_by_App_01.png ADC-V610PT_Setup_by_App_02.png ADC-V610PT_Setup_by_App_03.png

2. Press Add Video Device, select Install, then enter the camera name. Press Next.

ADC-V610PT_Setup_by_App_04.png ADC-V610PT_Setup_by_App_05.png ADC-V610PT_Setup_by_App_06.png

3. Camera may take several minutes to configure. Press X at the top left to exit.

ADC-V610PT_Setup_by_App_07.png ADC-V610PT_Setup_by_App_08.png ADC-V610PT_Setup_by_App_09.png

Troubleshooting

  • • Power cycle the camera by unplugging and plugging in power adapter.
  • • Move closer to Wi-Fi router.
  • • If issues persist, try resetting the camera to factory defaults.

LED Reference Guide

  • • Solid Green LED = Connected to Internet
  • • Solid Red LED = Wi-Fi or Ethernet connection problem
  • • Flashing Red LED = Factory reset or firmware upgrade in progress
  • • Flashing Red LED = Camera being factory reset

Chat