How to replace the backup battery for the IQ Panel 4

Please follow the steps below to replace the IQ Panel 4 backup battery:

1. Swipe down from the time display to open the Settings drop-down, then press SETTINGS

Enter_Program_01_Main.jpg Enter_Program_02_Dropdown.jpg

2. Press ADVANCED SETTINGS, then enter your Installer Code (1111, 2222)

Enter_Program_03_Settings_Menu.jpg Enter_Program_04_Enter_Code.jpg

3. Press POWER DOWN, then OK to confirm. The IQ Panel 4 will power down.

Power_Down_01.jpg Power_Down_02.jpg

4. To access and remove the battery (only after proper power-down procedures), use a small Phillips-head
screwdriver, undo the locking screw from the back of the panel and remove the SmartMount backplate or alternately remove the panel from the wall

001_-_Unscrew_with_PH_to_remove.png 002_-_Dismount_panel_from_backplate_or_stand.png

5. With the panel removed and back exposed, unplug the 4-pin battery connector from the board and pull up on the edge of the battery with your finger to release it from the battery compartment or "plastic hold down"


CAUTION: Do NOT use a screwdriver or anything sharp that could puncture the battery. Do NOT pull on the battery cable to try and remove the battery.

6. Replace the battery with Icon Energy Systems (Shenzhen) Co Ltd, Model IAN034NA or Ningbo
Veken Battery Co. Ltd., Model VT27 only

7. To restore the panel, replace the battery and secure it into place. Align the panel over the backplate, and slide it down into place. Replace the screw removed to secure the panel to the backplate. Plug the transformer into the power outlet.