2GIG Edge - Home Automation Programming

Please follow the steps below to add smart home devices to the 2GIG Edge panel:

1. Access the Z-Wave Settings menu by selecting the Settings Menu ( 0000_cog.png ) from the Home Screen

001.png

2. On the Settings Menu, tap Smart Home Settings

002.png

3. Tap Add Device. The Smart Home Device appears.

003.png

4. Follow the on-screen instructions to add specific devices, then tap Add Device. The panel will listen for a device to add. Follow the instructions included with the Z-Wave device to start the Learn process.

004.png

5. When the system discovers the device, it is automatically added and the Adding Device message appears

005.png

6. Enter the device’s DSK code, then tap ENTER.

NOTE: This enter code screen only applies to S2 Z-Wave devices.

006.png

7. The newly added device confirmation will appear. Tap OK.

007.png

8. Any device information captured during the discovery process appears below the device name. Tap DONE to return to the Z-Wave Settings screen.

008.png


Chat