Connecting a QS1431-840 Glassbreak Detector to Your Panel

When you are ready to set up your Qolsys QS1431-840 glassbreak detector, you will need to program it into your panel.

IQ Panel 2 Programming

1. Swipe down from the clock display at the top of the screen, then press Settings.

001a_Enter_Program_01_Main.jpg 001b_Enter_Program_02_Dropdown.jpg

2. Press Advanced Settings, then enter the Installer Code 1111.

002a_Enter_Program_03_Settings_Menu.jpg 002b_Enter_Program_04_Enter_Code.jpg

3. Press Installation, then Devices.

003a_Installation_Screen.png 003b_6.png

4. Press Security Sensors, then Auto Learn Sensors.

004a_7.png 004b_8.png

5. Open the cover by pressing the latch shown below; the panel will be sent a signal. Press Ok to confirm.


005b_9.png 005c_Auto_Learn_Confirm.png

6. Enter the sensor information as noted below, press Add New to save, then Home to exit.

006a_11.png 006b_Z-Wave_Add_09_Exit.jpg

Sensor information:

  • Sensor DL ID: Don't touch this option
  • Sensor Type: Select “Glassbreak”
  • Sensor Name: Select an appropriate name or create a "Custom Description"
  • Chime Type: This allows you to apply a specific sound to your device
  • Sensor Group: Set this to "13"
  • Voice Prompts: Leave this alone