Connecting a QS1231-840 Motion Detector to Your Panel
When you are ready to set up your Qolsys QS1231-840 motion detector, you will need to program it into your panel.
IQ Panel 2 Programming
1. Swipe down from the clock display at the top of the screen, then press Settings.
2. Press Advanced Settings, then enter the Installer Code 1111.
3. Press Installation, then Devices.
4. Press Security Sensors, then Auto Learn Sensors.
5. Open the cover by pressing the latch shown below; the panel will be sent a signal. Press Ok to confirm.
6. Enter sensor information as noted below, press Add New to save, then Home to exit.
Sensor information:
- Sensor DL ID: Don't touch this option
- Sensor Type: Select “Motion”
- Sensor Name: Select an appropriate name or create a "Custom Description"
- Chime Type: This allows you to apply a specific sound to your device
- Sensor Group: Set this to "17"
- Voice Prompts: Leave this alone