How to Program a Keyfob to the IQ Panel 2

1. Swipe down from the clock display at the top of the screen, then press Settings.

Enter_Program_01_Main.jpg Enter_Program_02_Dropdown.jpg


2. Press Advanced Settings, then enter the default installer code 1111 or 2222.

Enter_Program_03_Settings_Menu.jpg Enter_Program_04_Enter_Code.jpg


3. Press Installation, then Devices.

Installation_Screen.png 6.png


4. Press Security Sensors, then Auto Learn Sensors.

7.png 8.png


5. Hold both Lock and Unlock buttons to learn, then press OK to confirm.

Auto_Learn_Confirm.png

G.E._Keychain_Final.jpgEcoLink_Keychain_Final.jpg


6. Program keyfob settings then press Add New to save them, then Home to exit.

Add_Sensors_02_Keyfob.jpg Auto_Learn_Sensor_12_Exit.jpg


Sensor Information:

  • • Sensor DL ID: Leave this alone
  • • Sensor Type: Select Keyfob
  • • Sensor Name: Select Keyfob or create a custom description
  • • Chime Type: Leave this as None
  • • Sensor Group: Set this to 1-Mobile Intrusion
  • • Voice Prompts: Leave this alone