How to Program a Flood Sensor to an IQ Panel 2

1. Swipe down from the clock display at the top of the screen, then press Settings.

Enter_Program_01_Main.jpg Enter_Program_02_Dropdown.jpg


2. Press Advanced Settings, then enter the default installer code 1111 or 2222.

Enter_Program_03_Settings_Menu.jpg Enter_Program_04_Enter_Code.jpg


3. Press Installation, then Devices.

Installation_Screen.png 6.png


4. Press Security Sensors, then Auto Learn Sensors.

7.png 8.png


5. Remove the sensor cover to learn, then press OK to confirm.

Auto_Learn_Confirm.png


6. Program sensor settings then press Add New to finish, then press Home to exit.

Add_Sensors_02_Flood.jpg Auto_Learn_Sensor_12_Exit.jpg


Sensor Information:

  • • Sensor DL ID: Do not change
  • • Sensor Type: Select Water Sensor
  • • Sensor Name: Select an appropriate name or create a custom description
  • • Chime Type: Specific your desired sound
  • • Sensor Group: Select 38 Water Sensor
  • • Voice Prompts: This allows you turn on or off the vocal chime