How to Program the Honeywell 5800PIR-RES to the GC2 Panel

Video Instructions:


Step-by-Step Instructions:

1. Press the Brinks Home logo in the bottom right of the panel, enter the default installer code 1561, then press System Configuration to go to Q1 Wireless Sensor Programming.

001c_Programming_-_Enter_Program_01_280x159.png 001b_User_Menu_-_Disarm_05_280x159.png 001a_Programming_-_Enter_Program_03_280x159.png


2. Press the right arrow to choose your new sensor number, choosing an open zone as indicated by a white space and number only, then press the down arrow to continue.

002b_Image_Sensor_Program_01a_275x156.jpg 002a_Image_Sensor_Program_01_275x156.jpg


3. Press the right arrow to select Sensor Type (03) Perimeter, then press the down arrow to continue.

003b_Image_Sensor_Program_02a_Interior_Follower_275x156.jpg 003a_Image_Sensor_Program_02_Interior_Follower_275x156.jpg


4. Press the right arrow to select your equipment code, then the down arrow to continue.

005b_Image_Sensor_Program_03a_9999_Image_Sensor_275x156.jpg 005a_Image_Sensor_Program_03_9999_Image_Sensor_275x156.jpg


5. Press Shift, then Learn, then insert batteries or press the tamper button several times on the motion detector. Wait 20-30 seconds and once the sensor is found press Ok, then the down arrow to continue.

*Alternatively, this step can be completed by manually entering the serial number on the back of the sensor.

006c_Image_Sensor_Program_04_Serial_1_275x156.jpg 006a_Image_Sensor_Program_04_Serial_2_275x156.jpg


6. Enter (0) new for the equipment age, then press the down arrow to continue.

007a_Image_Sensor_Program_05_Age_275x156.jpg


7. Loop number will be (1) 1, then press the down arrow to continue.

008_Image_Sensor_Program_06_Loop_1_275x156.jpg


8. Leave the dialer delay set to the default of (1) enabled, then press the down arrow to continue.

009b_Image_Sensor_Program_07a_Delay_275x156.jpg 009a_Image_Sensor_Program_07_Delay_275x156.jpg


9. Press Insert, then the right arrow to select your desired voice descriptor. For additional words, press Insert again and repeat the steps.

*Alternatively: you may use a 3-digit code to jump to the word of your choice. Code #147 represents motion detector.

010b_Image_Sensor_Program_08_Description_1_280x159.jpg 010a_Image_Sensor_Program_08_Description_2_280x159.jpg


Enter up to 6 words, then press the down arrow to continue.

011_Image_Sensor_Program_08_Description_3_280x159.jpg


10. Press the right arrow to set Sensor Reports to (1) enabled, then press the down arrow to continue.

012b_Image_Sensor_Program_09_Disabled_275x156.jpg 012a_Image_Sensor_Program_09_Enabled_275x156.jpg


11. Press the right arrow to set supervised to (1) enabled, and press the down arrow to continue.

011a.alt_2GIG_Q1_RF_Sensor_Programming_11_Supervision_278x158.png


12. Chime is typically left at (00) disabled for motion sensor chime. Press down to continue to the summary.

013a_2GIG_Q1_RF_Sensor_Programming_12_Chime_278x158.png


13. Press edit next to program another sensor, or press skip, end, and exit to complete the process.

013b_Image_Sensor_Program_10_Summary_1_275x156.jpg