How to Program the QS5110-840 to the IQ Panel 2

Step-by-Step Instructions:

1. Swipe down from the clock display at the top of the screen, then press Settings.

Enter_Program_01_Main.jpg Enter_Program_02_Dropdown.jpg


2. Press Advanced Settings, then enter the default installer code 1111 or 2222.

Enter_Program_03_Settings_Menu.jpg Enter_Program_04_Enter_Code.jpg


3. Press Installation, then Devices.

Installation_Screen.png 003b


4. Press Security Sensors, then Auto Learn Sensors.

004a 004b


5. Twist the smoke detector from the backplate, then press Ok to confirm.

005b Auto Learn Confirm 005c Arrow Down


6. Program sensor settings, then press Add New to save and exit.

Add_Sensors_02.jpg


Sensor Information

  • Sensor Type: Select Smoke Detector
  • Sensor Name: Select an appropriate name for the sensor or create a custom description
  • Chime Type: Allows you to apply a specific sound to your device when it’s used
  • Sensor Group: From the dropdown, select 26 - Smoke/Heat
  • Voice Prompts: Leave on

7. Press Home to exit programming.

Auto_Learn_Sensor_12_Exit.jpg