How to Program the GD00Z to Your Panel

Z-Wave devices are compatible with a variety of systems. Click on your panel below for instructions specific to your system. If your system is not represented below, you can text a Support Representative any time for programming instructions at 469.513.8685.

IQ2 GC2 Simon XTi Simon XT

Qolsys IQ Panel 2 and Z-Wave Pairing Instructions:

1. Press or swipe down clock display at top for Settings Tray, then press Settings.

Door_Lock_01.jpg Door_Lock_02.jpg


2. Press Advanced Settings, then enter the default installer code 1111.

Door_Lock_03.jpg Door_Lock_04.jpg


3. Press Installation, then Devices.

Door_Lock_05.jpg Door_Lock_06.jpg


4. Press Z-Wave Devices, Add Device, then Pair.

003.5 Z-Wave Selection Door_Lock_07.jpg Door_Lock_08.jpg


5. IQ Panel 2 enters Z-Wave learn mode, then trigger the garage door controller by pressing Link.

Door_Lock_09.jpg


GD00Z-5 Pairing


6. If successful, the IQ Panel 2 displays device settings, press Name, then select the name.

Z-Wave_Thermostat_Add_03_Learned.jpg Z-Wave_Thermostat_Add_05_Name.jpg


8. Press Add, then Home to exit.

Z-Wave_Thermostat_Add.jpg


Line


2GIG GC2 and Z-Wave Pairing Instructions:

1. Press Services, then press the Z-Wave logo.

1_Home_Disarmed.png 2_Z-Wave_Services.png


2. Press the wrench icon for settings, then enter the default installer code 1561.

01_Z-Wave_Main.png 02_Enter_Code.png


3. Press Add Devices, entering the system into Z-Wave learn mode.

03_Toolbox_Add.png 04_Add_Device_1.png


4. Activate the GD00Z garage door controller by pressing the link button shown below:

GD00Z-5 Pairing


5. Learning may take up to 2 minutes, press Back or Home to exit.

05_Add_Device_2.png 06_Add_Device_3a.png

Line


Interlogix Simon XTi and Z-Wave Pairing Instructions:

1. Press the gear icon for the settings menu, then press the down arrow several times to reach Programming.

Enter_Programming_01_Main.jpg Enter_Programming_02_Settings.jpg


2. Press Enter next to Programming, enter your master code, then press Ok.

Enter_Programming_03_Programming_Enter__1_.jpg Enter_Programming_04_Enter_Code.jpg


3. Press Interactive Services, then press Z-Wave.

Interactive_Services_01_Main_Select.jpg Z-Wave_Add_01_Interactive_Services_Menu.png


4. Press Add Device to start the learning process.

Z-Wave_Add_02_Z-Wave_Menu.png Z-Wave_Add_03_Add.png


5. Activate the GD00Z garage door controller by pressing the link button shown below:

GD00Z-5 Pairing


6. The Simon XTi beeps and displays Device XX Added. Press Close several times to exit.

Z-Wave_Add_04_Added.png Main_Screen.jpg


Line


Interlogix Simon XT and Z-Wave Pairing Instructions:

1. Hold the Star button (*) for 10 seconds to open the Z-Wave menu.

Z-Wave_Menu_1.jpg

2. Hold the 1 key for 10 seconds.

Simon_XT_Z-Wave_Add_02.png


3. The Simon XT enters Z-Wave learn mode.

Simon_XT_Z-Wave_Add_03.png Simon_XT_Z-Wave_Add_04.png


4. Activate the GD00Z garage door controller by pressing the link button shown below:

GD00Z-5 Pairing


5. When successful, the Simon XT beeps and displays the number of devices in memory.

Simon_XT_Z-Wave_Add_05.png Simon_XT_Z-Wave_Add_07.png


6. Hold # for 10 seconds to exit.

Pound_Button.jpg