How to Program the Kwikset 620 to the IQ Panel 2

When you are ready to set up your Kwikset 620 smart door lock, you will need to program it into your panel.

1. Press or swipe down the clock display at the top for the settings tray. Press Settings for user menu, then select Advanced Settings.

15.1.1a_Enter_Program_01_275x155.jpg 15.1.2a_Enter_Program_02_275x155.jpg 15.1.3a_Enter_Program_03_275x155.jpg


2. Enter the default installer code 1111 or the dealer code 2222 to access the installer programming menu. Press Installation, then Devices.

15.2.1a_Enter_Program_04_275x155.jpg 15.2.2a_Z-Wave_01_Installer_Menu_275x155.jpg 15.2.3a_Z-Wave_02_Devices_275x155.jpg


3. Press Z-Wave Devices, then select Add Device. Press Pair to begin the learning process. Note: if you experience trouble with the system learning, try the clear device option. Select Clear Device, then press the learn button on the device. If the clear is successful, try to re-add.

15.3.1a_Z-Wave_03_275x155.jpg 15.3.2a_Z-Wave_Add_00_Main_275x155.jpg 15.3.3a_Z-Wave_Add_01_Main_275x155.jpg


4. Press the left learn button under the battery cover.

15.4.1a_Z-Wave_Add_02_Searching_275x155.jpg

620Programming


5. Press Name, enter the pre-determined name or select Custom Name to choose your own name, up to 10 characters.

15.5.1a_Z-Wave_Kwikset_Lock_Add_02_Learned_275x155.jpg 15.5.2a_Z-Wave_Thermostat_Add_05_Name_275x155.jpg


6. Press Check or the keyboard icon, select Add to finish, then Home to exit.

15.6.1a_Z-Wave_Thermostat_Add_07_Custom_Name_02_275x155.jpg 15.6.2a_Z-Wave_Kwikset_Lock_Add_05_Add_275x155.jpg 15.6.3a_Z-Wave_Add_09_Exit_275x155.jpg