How to Program a Freeze Detector to an IQ Panel 2

1. Remove the battery tabs then apply adhesive tape to the bottom of the sensor.

001.2a Remove tabs 001.2b Remove adhesive

2. Mount the sensor horizontally with the arrow facing down pointing to the door.

002.2a Mounting-Placement on Garage

IQ Panel 2 Programming

1. Swipe down from the clock display at the top of the screen, then press Settings.

Enter_Program_01_Main.jpg Enter_Program_02_Dropdown.jpg

2. Press Advanced Settings, then enter the default installer code 1111 or 2222.

Enter_Program_03_Settings_Menu.jpg Enter_Program_04_Enter_Code.jpg

3. Press Installation, then Devices.

Installation_Screen.png 6.png

4. Press Security Sensors, then Auto Learn Sensors.

7.png 8.png

5. Remove the sensor cover to learn then press Ok to confirm.

Brinks Home Security IQ2 Programming Auto_Learn_Confirm.png

6. Enter sensor information then press Add New to save, then Home to exit.

11.png Auto_Learn_Sensor_12_Exit.jpg

Sensor Information:

  • • Sensor DL ID: Leave this alone
  • • Sensor Type: Select Freeze Sensor
  • • Sensor Name: Select an appropriate name or create a custom description
  • • Chime Type: This allows you to apply a specific sound to your device when it’s used
  • • Sensor Group: Enter 38
  • • Voice Prompts: This allows you turn on or off the vocal chime