Interlogix Door/Window Sensors—Battery Replacement
When it is time to replace the battery in your door/window sensor, you will see an alert on your system panel, as well as a notification in the Brinks Home™ Mobile App.
Your panel is compatible with a variety of door/window sensors. Select the image of your door/window sensor below to view instructions on how to replace the batteries. Batteries can be purchased at your local hardware, mass retailer, or battery store.
Because your panel supports compatibility with a wide range of sensors, we ask that you find the image of your door/window sensor below to view instructions on how to complete your battery replacement.
Interlogix 60-670-95R Door/Window Sensor:
Press the end button to remove the cover, then remove and replace 2 AAA alkaline batteries.
Interlogix 60-362N-10 Door/Window Sensor:
Press end latch to remove the cover, then remove and replace the CR123A lithium battery.
Ecolink TX-E201 Door/Window Sensor:
Slide cover up to remove, then remove and replace the CR2032 lithium battery.
Interlogix/GE Security TX-1012-01 Micro Door/Window Sensor:
Insert a coin or screwdriver into the slot and twist to open, using a screwdriver to then pry open the inside cover. Remove and replace CR2032 battery.
Interlogix 60-688-95 Micro Door/Window Sensor:
Use a screwdriver to pry open the backplate, then pry off the cover. Remove and replace CR2032 battery.