Qolsys Smoke Detectors—Battery Replacement
Find the image of your smoke detector below to view instructions on how to complete your battery replacement. Due to the versatility of your panel, only commonly paired sensors are shown. If your specific sensor is unlisted, you can search for other sensors here. If you need further assistance, you can text a Support Representative any time at 469.513.8685.
Once you've replaced the batteries, the error on your panel should clear within one hour. If you would like to clear the error manually, click here.
Qolsys QS5110-840 / QS5110-P01 IQ SMOKE Smoke Heat Detector:
Twist sensor counter-clockwise to remove from the base, then remove and replace 3 AAA alkaline batteries.
Alula / Resolution Products RE112 / RE212 / RE212T / RE312 Smoke Detector:
Twist sensor counter-clockwise to remove from the base, then remove and replace CR123A battery.
Interlogix / GE Security TX-6010-01-1 Smoke Heat Detector:
Twist sensor counter-clockwise to remove from base.
Slide the battery plate off as shown below, then remove and replace 2 CR123A lithium batteries.